PRODUCT
IKO
“IKO” consists only of two plates taken out from a layered plywood and original metallic material for joint.
The plates taken out from the layered plywood are seamless with excellent strength, enabling free shaping and thinness. Then the unique forms of those two plates allow to hang various kinds of clothes, hats and bags, and thanks to its ability to open 180 degrees by the metallic material, it can be efficiently used for the environment and the limited space where it is used.
It can be also placed against the wall while folded and used as clothes hanger by using the dedicated hook attached to it, and also as a partition if cloth and stall are directly hung.
“IKO” is the flexible furniture usable conveniently for different spaces and applications.
*Two sizes are available for this product.
IKO
type : clothes hanger
material : 18t plywood
size : W700mm×D41mm×H1620mm or W700mm×D700mm×H1620mm
hook : steel
IKO-S
type : clothes hanger
material : 18t plywood
size : W570mm×D41mm×H1620mm or W570mm×D570mm×H1620mm
hook : steel
HACHI
Generally, when planting plant directly in a plant pot, drain holes on the bottom are required due to problems of root rot by poor breathability and puddle. Therefore, a saucer is necessary for placing a plant pot directly in the room to keep the floor clean.
This product “HACHI” is a planter of a set of a plant pot and saucer, which allows direct planting of plant therein with a drain hole on the plant pot. In addition, since the saucer is set inside the plant pot, it achieves the unified structure by design without feeling of existence of the saucer.
The hidden saucer avoids pileup of dust and also conceals drained water and soil, which allows us to more closely enjoy plants and flowers placed on a dining table and office desk.
This unique form is so stable that it does not easily fall and prevents us from water in the saucer, which can be used anywhere according to forms of different kinds of plants with no problem.
Additionally, each of the plant pot and saucer of this planter is formed by the method called “spinning” where a rapidly-rotated flat aluminum plate is transformed with force added, of which total weight is as light as about 900g.
The material of aluminum of the opposite pole further evokes beauty and sweetness of plants.
HACHI
type : planter (tray included)
material : aluminum
production method : metal spinning
size : Φ260(outside),Φ173(Upper dimension),H183
HACHI 60
type : planter (tray included)
material : aluminum
size : Φ600(outside),Φ400(Upper dimension),H430
HACHI 80
type : planter (tray included)
material : aluminum
size : Φ800(outside),Φ530(Upper dimension),H570
RIN
Lamp series expressing delicacy and beauty of a single flower.
Despite its minimum design, it gives an accent to space like a displayed single flower.
RIN-W
A wall light of RIN series designed from image of a single flower displayed on the wall.
RIN-T
A table stand of RIN series designed from image of a single flower displayed on the table and desk.
type: table lamp
material: steel
size: W270, D381, H878
light bulb: 100V, E17, 5.2W, bulb type LED lamp
RIN-C
A chandelier of RIN series designed from image of gorgeous bunch of flowers of different colors.
Each of the lamps and frames can be enjoyed in combination of different colors by their set-in style to each other.
type: chandelier
material: steel
size: φ798, H1220
light bulb: 100V, E17, 5.2W, bulb type LED lamp×8
S HANGER
A coat stand with hangers and base are of the same shape.
Used with combination of the characteristic hanger shape and bent bar shape. When not used, hangers can be stacked in the area of the same shape base.
Shape of one bent bar is for hanging not only hangers, but also stoles, hats, bags, etc. directly.
A compact coat stand usable for necessity of hangers.
type: coat stand&hangers
material: steel+plywood
size: W451, D333, 1850
PETA
A lamp usable in various places, positions and applications.
Characteristic shape of the product is free from feeling of pressure although hung in various areas. It can be used hung at a low position such as desk and table, etc. It can be also used as a wall light by being hung on the hook, etc. on the wall.
type: suspension lamp & wall lamp
material: steel + wood
size: W300, D86, H239～
light bulb: 100V, 3.6W, LED lamp
19
A knockdown coat stand structured only with one bent bar and triangle box.
Each part is not fixed with screws, etc., but with one hole and two grooves on the box to keep balance of the coat stand.
The space is effectively used by making storage at its bottom. Characteristic shape of the product can be also used along the wall, allowing efficient use even in small space.
type: knockdown coat stand
material: steel + wood box
size: W250, D376, H1700
SOSO2
The lamp’s inclination gives different lamp forms and light impressions depending on the angles and directions in which it is seen.
The lamp inclines 30 degrees backward from vertical direction and the body is made of distinct-form steel plate bent to V-shape. Variation in the balance relation creates a unique form of lighting equipment.
type: floor lamp
material: steel+cotton lamp shade
size: W400mm×D830mm×H1400mm
light bulb: 100V, E17, 9W, bulb type fluorescent lamp
EN
A table lamp with characteristic floating feeling of the circular disc.
By finishing the supporting bar connecting the circular disk and base deliberately in the different style and by diverting it, their respective relationships are weakened. Floating feeling created by such elaboration is made as characteristics of this table stand.
One side is inclined and receives the reflecting light on the face, strengthening the floating feeling.
type: table lamp
material: steel+FRP
size: φ400, D505, H600
light bulb: 100V, E17, 5.2W, bulb type LED lamp
EDA
A coat stand made of three bars bent into the same shape.
One bar is bent to be used as a hook at both ends and gathered with the other two of the same shape in the center to make a coat stand.
The wooden parts in the center does not only bundle those but are also used to hang umbrellas.
type: coat stand
material: steel+wood
size: W388, D338, H1700
JORO
A pendant lamp with characteristic shadow created in the product.
Shadow is created on surface of the product by combination of light passing through the acrylic plate and shape of shade.
A pendant lamp that simultaneously creates illuminating light and beauty of shadow.
type: suspension lamp
material: steel+acrylic plate
size: φ300, H200～
light bulb: 100V, 10.8W, LED lamp
TOTTE
A desk lamp with a grip.
With the supporting bar bent at 90 degrees as a grip, it efficiently illuminates necessary places by adjusting direction of the tilted light-emitting face.
type: desk lamp
material: steel
size: W200, D263, H350
light bulb: 100V, 3.4W, LED lamp
Y HANGER
A coat stand made of one bar.
Each of positions and directions of the bar bent at 90 degrees in four areas can be used for applications. The characteristic Y-shaped hangers can be hung on the bar by interlocking the slit area. When not used, the hangers can be stacked by inserting the center hole of the hanger into the short bar on the base.
type: coat stand&hangers
material: steel+plywood
size: φ450, H1850
KAKINE
It is a screen which can be changed to various shapes and sizes by assembling sheets of paper of the same shape.
Multiple complicated forms create a shape by overlapping each other and they change their impression depending on the brightness of the surrounding.
type: screen
material: paper
size:
W1020mm×D135mm×H1290mm (screen)
W190mm×H108mm (322 sheets of paper)
